The Load Plan in Cube-IQ provides a visual representation of the optimized load, enabling users to inspect, adjust, and finalize container arrangements. It allows for 3D interaction to view loading from any angle and make necessary adjustments.
Accessing the Load Plan
The Load plan can be accessed in the following ways:
- From the Main Menu: Select the Load Plan tab.
- Using a Keyboard Shortcut: Press the F4 keyboard shortcut.
Prerequisites
Before accessing and viewing a Load Plan in Cube-IQ, a load must be created and configured in the Load Setup window. Containers and products should be added, and the load must be optimized.
Step-by-Step Instructions
- Access the Load Plan by navigating to the Load Plan tab on the main menu or using the F4 key.
- Manipulate the graphics window:
- Rotate the View: Drag the mouse across the graphics window to rotate the view.
- Use the Viewing Cube: Click on any face, edge, or corner of the cube on the right side of the screen to adjust the viewing angle.
- Toolbar Options: Access additional functions through the toolbar within the graphics window.
- Use the Slider on the right side of the screen to view the load's step-by-step build.
- Print the load plan using the Load Plan button in the Reports section of the Load Setup toolbar.
- Click on the status bar at the bottom of the screen to lock specific parts of the load.
- After locking parts of the load, make changes to the Load List or Settings, and re-optimize using the Load Setup screen.
- After locking parts of the load, make changes to the Load List or Settings, and re-optimize using the Load Setup screen.
Best Practices
- Use the Viewing Cube for quick and precise angle adjustments.
- Lock portions of the load that require no changes before re-optimizing to preserve accuracy.
Additional Resources
How To Consolidate Loads Into One Load